background image

26

 

M

aIntEnancE

P/N 3034041_D 

U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com

Do NOT Use:

•  Abrasive cleansers and scouring pads, as 

these will mar the finish.

•  Coarse paper towels on coated glass.

•  Ammonia-based cleaners on acrylic parts.

•  A hose on lighted shelves or submerge the 

shelves in water.

•  Solvent, oil or acidic based cleaners on any 

interior surfaces.

•  A hose on rail lights, canopy lights or any 

other electrical connection.

Do:

•  First turn off refrigeration, then disconnect 

electrical power.

•  Remove product and loose debris.

•  Thoroughly clean all surfaces with soap 

and hot water. 

d

o

 

not

 

use

 

steAm

 

or

 

high

 

wAter

 

pressure

 

hoses

 

to

 

wAsh

 

the

 

interior

.

 t

hese

 

destroy

 

merchandiser

s

 

sealing

 

causing

 

leaks

 

and

 

poor

 

performance

.

•  Take care to minimize direct contact between 

fan motors and cleaning or rinse water.

•  Rinse with hot water, but do NOT flood. 

•  Allow merchandiser to dry before resuming 

operation.

•  Wipe down lighted shelves with a damp 

sponge or cloth so that water does not enter 
the light channel.

 d

o

 

not

 

use

 

A

 

hose

 

or

 

submerge

 

shelVes

 

in

 

wAter

.

•  After cleaning is completed, restore power 

and turn on the merchandiser.

Summary of Contents for VRM1B















































Reviews: