6. LUBRICATION
6-1
Headstock Lubrication
Headstock lubrication is splash injection type. Oil grooves are equipped
around the headstock to provide lubricant flowing from oil grooves to
spindle, then finally reach the bottom of the headstock. To add oil, take
off the oil plug on the top of the headstock cover, fill to the centerline of
oil sight glass. Oil drain hole is located on the right bottom side of the
headstock.
Before operating the lathe, be sure the headstock is filled with oil. If not,
add Shell Tellus #32. Exchange oil after one month use for the first time.
Thereafter every two months.
6-2
Gear Box & Apron Lubrication
1.
The gearbox is a reservoir oil bath type. To ensure the long service life
of the gearbox and bedways, change the oil every six months.
2.
The apron is also a reservoir oil bath type. Add oil as soon as the oil is
lower than the centerline of the sight glass.
6-3
Lubrication Charts
No.
Location
Methods
Quantity
Oil time
Exchange time
Loosen the oil input hole
One month at the
Once per
beginning,
1
Headstock
screw on the left top side
L
month
thereafter once
of the headstock cover
two months
Open the top cover and
Once per
2
Gear Box
loosen the oil input hole
L
Every six months
screw.
month
3
Apron
Loosen the oil input hole
L
Once per
screw
month
4
Compound rest
Add oil with oil can
As
Once per
required
month
5
Auto Feeding rod
Add oil with oil can
As
Once per
required
month
6
Tailstock
Add oil with oil can
As
Once per
required
month
7
Leadscrew
Add oil with oil can
As
Once per
required
month
8
Bedway
Press the manual oil
As
Once per
pump
required
month
28
Summary of Contents for HU 480 X 2200 VAC TOPLINE
