Fr
ançais
45
6.
Attribuer une télécommande (émetteur)
Pour attribuer une télécommande à l’appareil de commande, procédez
comme ci-dessous :
6.1
Assurez-vous que l’appareil de commande soit installé correctement et branché.
6.2
Déplacez le battant d’environ
10 cm
avec la main. Cela enclenche le mode de
programmation dans l’appareil de commande. Les télécommandes peuvent être
attribuées durant une période de
3 secondes
.
6.3.
Appuyez sur la touche de la télécommande pendant au moins
15 secondes
.
Quand la télécommande a été enregistré dans la mémoire de l’appareil de
commande, le battant se met en mouvement ouvert – fermé.
6.4
Testez maintenant que la télécommande actionne le battant.
Assurez-vous que le mode de programmation soit activé dans seulement
un appareil de commande. Si plusieurs appareils de commande sont mis en
mode de programmation simultanément, les télécommandes de ces
appareils de commande seront également attribués
3
secondes
15
secondes
© HUWIL 02/2009 Huwilift E-Verso / E-Strato / E-Senso/ E-Senso+
Bedienungsanleitung FR 11.03.2009 13:40 Uhr Seite 8