HUYGENS OPTICS
CS-2/3 camera strobe manual V01
6
Safety
Installation and Maintenance
Installation and maintenance should only be attempted by knowledgeable personnel that is aware of
the technical aspects and risks of the equipment. Relevant regulations for electrical installations
have to be observed.
Take notice of the particular hazards of this product such as risk of epileptic attacks, misleading
visual perceptions of fast-moving parts (see section General > particular hazards). Instruct every user
of this equipment on the presence of these hazards.
WARNING
: Only use the unit with the correct voltage as indicated on the device
and this manual. Do not apply the reverse polarity on the terminals. The
operating voltage is indicated on the serial plate. As accessories, only use the
equipment certified or supplied by Huygens Optics.
WARNING:
Allow for sufficient ventilation of the electrical parts. Lack of
ventilation may lead to overheating and subsequent damage of the unit. Never
cover the device with flammable materials (such as cloth, paper, etc.) since this
introduces a fire hazard.
WARNING:
Do not operate the unit in an environment with temperatures in
excess of 40° C or below 0°C. Prevent the contact of the equipment with water
and formation of condensation in- or on the equipment.
WARNING:
Do not attempt to repair the unit yourself, since the circuitry in the
device temporarily deliver high peak currents with a total of up to 60 Amperes.
Always refer to Huygens Optics for repairs and spare parts. Incorrectly executed
repairs can lead to personal injury and damage of the unit.
