Page.65.
（
（
（
（
2
22
2
）
）
）
）
PING Test
PING is the most conventional network debugging tool; it is used for testing if the connected IP camera
or other network equipment’s Ethernet port is working normally and the IP address is correct
Connect a network cable to the LAN port and click the
icon to open the PING tool. You can set
your LOCAL (native) IP address, Remote IP address (e.g. IP camera), Packet count, Packet Size, Packet
time and Timeout. Press “Start” to start pinging. If the IP camera or network device is not configured
properly or not plugged in, it will say “Destination host unreachable,” or have 100% packet loss. If the
tester connects to the device, the send and receive packets will have a 0% packet loss.
Application:
PING testing is the most conventional network debugging tools. It is used for testing if
the connected IP camera or other network equipment’s Ethernet port is working normally and the IP
address is correct.
It’s normal that the first data packet will be lost when test start.
（
（
（
（
3
33
3
）
）
）
）
Network test (Ethernet bandwidth test)
Network test (Ethernet bandwidth test)
To use the Network tester, you will need two IP testers. One is used as a Server and the other as a Client.
