Poseidon 1250 Tset
HW group
www.HW-group.com
Quick setup - Poseidon 1250 Tset
First steps using Poseidon for temperature measuring
Poseidon 1250 Tset package contents:
•
Poseidon 1250 device
•
Temp-1Wire temperature sensor with RJ12 connector
•
Door contact
•
12 V power adaptor
•
Printed „Quick setup“
•
CD with documentation, manual and Software
1)
Poseidon 1250 Tset wiring
•
The green POWER indicator will light up
•
If the Ethernet connection is OK, the green LINK indicator will also light up. It will blink during
data transfer via Ethernet (Activity indicator)
2) Poseidon configuration using PnEye
•
You will find
PN Eye
installation file on supplied CD in
\Poseidon\model 1250\
directory,
you can also download the latest version from our website
www.HW-group.com
, follow the
Poseidon 1250 product or PN Eye.
•
Install
PN Eye
– follow the instruction of setup wizard
•
PnEye icon will be placed on your desktop after successful installation
•
Click on
PN Eye
icon to start program
Poseidon 1250 Tset
Connect Poseidon to Port1 -
Ethernet
(direct
cable to LAN Switch, crossed to PC).
Connect cables of door magnetic sensor to pin
1 and 2 of the Port 5 (
Dry contacts
).
Connect
power adaptor
to power supply and
to power supply connector of Poseidon.
Connect Temp-1Wire
temperature sensor
to the Port2 - RJ12
1-Wire sensor bus.
Check DIP switch configuration. See picture for
DIP switch
configuration during device setup
(DIP1=Off, DIP2=ON DIP3=Off, DIP4=Off).
