Poseidon2 3468
– Manual
HW group
www.HW-group.com
7
First steps
4) WWW interface of the device
To open the WWW interface of the device
:
o
Enter the IP address into a web browser
o
Click the IP address in UDP Config
o
Click the underlined IP address in the
UDP SETUP utility
The WWW page displays current states of devices and sensors.
Web interface of the device
General
:
Overview of current readings
General Setup:
IP address, DNS, security (username/password)
SNMP:
SNMP / SNMP Trap configuration (ports and alarm recipients)
:
Configuration and test
GSM & RFID
:
Configuration and test in order to use a remote SMS-GW
Log & Time
:
Time configuration, NTP server
Sensors
:
Device name, sensor names, status overview
Inputs
:
Control of inputs and alert parameters
Outputs
:
Control and mode configuration of outputs
System
:
Firmware upgrade, save/restore configuration, etc.
User-defined names for
sensors and digital
inputs
Action when value
out of range
Alarm thresholds
