HWAM Autopilot IHS 3420, User Manual

11

In case of a chimney fire and overheating, the HWAM Autopilot IHS

TM

 will enter a security mode and 

automatically adjust all dampers, effectively quenching the fire. Do not open the stove door, since that 
might cause the fire to rekindle. Contact the fire brigade. After a fire, the stove should be checked by a 
chimney sweep before use.

t

hE

 R

EMotE

contRol

The remote control is the user interface of the HWAM Autopilot IHS

TM

. The remote control measures 

the actual room temperature. It must hence be placed in a location in the room, where it is not affected 
by unnaturally high temperatures, such as the wood-burning stove’s radiation heat or direct sunlight.
On the remote control you enter the desired heat level, as you would on a radiator thermostat. Via radio 
waves the remote control sends information to the stove’s Air box (control system) about the present 
room temperature as well as the desired heat level.
Below you will find the functions of the remote control. As a point of departure, the normal display image 
of the remote control will show four points: 

1) The room temperature 
2) The battery level of the remote control 
3) The adjustment of the thermostat (the heat level selected)
4) The status line (shows the combustion phases) 

Button: 
Short pressure – in the start phase or the combustion phase = adjustment of the 
thermostat (desired heat level)
Short pressure – in standby or the burning out phase = start the wood-burning 
stove, i.e. prepare the stove for lighting up.
Long pressure – can only be carried out when there is no light in the display = 
advanced menu 

Symbol Description

IHS-logo
Visible when the remote control is switched on, for instance when the batteries 
are changed.
Room Temperature
The room temperature is shown in the centre of the display. The room temperature 
is measured in the location of the remote control. The actual room temperature is 
used both when controlling the combustion and in connection with the timing of 
the re-stoking alarm. The remote control should hence not be placed close to the 
stove or in direct sunlight, since it will be affected by unnaturally high heat levels.

Battery level
The battery level of the remote control. When the batteries are at a minimum 
level, they need to be changed. Expected battery life at normal use is approximately 
½-1 year.

20° C

IHS

21°C