7
i
nstAllAtion
General information
Installation of your HWAM woodburning stove must always comply with local building regulations. It is
a good idea to consult your local chimney sweep before installing, since he will be the one to sweep the
chimney and stove.
Always follow the instructions of the manual carefully and make sure that the installation is carried out
by a qualified professional.
HWAM packaging material should always be handled in accordance with the local rules for waste handling.
Room requirements
There must be a constant supply of fresh air to the room in which the stove is to be installed. The
woodburning stove uses approx. 11-14 m
3
air per hour. In comparison, a modern cooker hood sucks up
to 1000m
3
air per hour. A window that opens or an adjustable air vent should be sufficient, but it is also
possible to connect the stove to a HWAM combustion air system. The air inlet/grating must be placed
so that they do not become blocked.
Please be aware that not all glass parts are heat-resistant. For this reason, a glass wall should sometimes
be treated as a flammable wall, in which case we ask you to contact your local chimney sweep or glass
producer to hear at what distance the stove should be kept from glass.
Load-bearing capacity of floor
Before installing the stove, you must ensure that the load-bearing capacity of the floor can withstand
the weight of the stove and the chimney. The weight of the chimney should be calculated according to
its dimensions and height.
Technical data
Model
Weight
Height
Width
Depth
HWAM 3420c/3420m
107/104 kg
100,6 cm
54,0 cm
37,1 cm
HWAM 3420c/3420m, soapstone
149/146 kg
101,4 cm
54,0 cm
37,1 cm
HWAM 3520c/3520m
118/115 kg
125,8 cm
54,0 cm
37,1 cm
HWAM 3520c/3520m, soapstone
167/164 kg
126,8 cm
54,0 cm
37,1 cm
HWAM 3530c/3530m
131/128 kg
143,8 cm
54,0 cm
37,1 cm
HWAM 3530c/3530m, soapstone
191/188 kg
144,8 cm
54,0 cm
37,1 cm
Heat storing slabs, HWAM 3520
44 kg
Heat storing slabs, HWAM 3530
77 kg
The stove is mainly made of sheet iron, with some items made of cast iron. The HWAM Autopilot IHS
TM
is an electronic product primarily consisting of plastic, a printed circuit board and wires.
Test results from nominal test EN 13240
Nominal heating effect
4.5 kW
Smoke temperature
238 ºC
Exhaust gas flow
3.66 g/s
Efficiency
83.4 %
The test result according to NS 3058
Particle emission
2.45 g/kg
Summary of Contents for Autopilot IHS 3420
