![background image](http://html1.mh-extra.com/html/hwam/monet-h/monet-h_installation-manual_2190445015.webp)
1. Automatic aeration
2. Vent
3. Outlet
4. Supply by AVTA valve
5. Floor heating
6. Radiator
7. Supply
As to installations that are not done by a specialist we have to decline every warrantee.
As regards professional installation, the person who made the installation is respon-
sible for the construction.
Connection to central heating system
HWAM Monet can be connected to a new or an existing central heating system as a supple-
mentary auxiliary kettle. The water supply must be connected at 4, and the return water from
the woodburning stove must be connected the return line of the system. A part of the water
supply will then circulate through the stove where it is heated further, before it is mixed with
the colder return water.
At the same time it is secured that there is always flow in the stove, no matter if the radiator
thermostats of the heating system should be closed.
Depending on the need for heat, the shunt valve can be set at ”summer position” for quickly
utilization of the stove to heat other rooms with radiators. If the need for heat is not very im-
portant it might be necessary to set the shunt towards “winter position” to involve more water
in the circulation. With the shunt in “winter position” the kettle heats domestic water.
HWAM Monet connected to a central heating system
1
8. Return
1
9. Return conduit
10. Oil-fired burner
11. Hot water
12. Expansion tank
13. Shunt valve
14. Pump
Summary of Contents for Monet H
