E & OE Instructions Part number IN1261 Ed A
13
©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. July 2012
Fitting The Internal Parts
Before the stove is installed, you must ensure that all the internal parts are fitted correctly.
1
2
3
4
5
6
7
8
1
2
3
4
7
8
5
6
1
2
3
4
5
6
7
8
1, Baffle plate should be placed on the steel rail and the holder at the front middle.
2. The baffle plate is suspended on three hooks beneeath the top plate. One of these hooks has an additional
flap that is bent upwards for protection when in transport. This should be removed with a screwdriver before
installation.
3. Grate cover plate. Should always cover the grate.
4. Rear flue outlet. If your stove was ordered as top flue outlet this will be factory fitted and sealed.
5. Removable rear plate. Covers the automatic system, this must always be fitted if the stove is installed
near a combustable wall.
6. Loose heat shield under the ash pan. This can be used as a lid when the ash pan is removed for
emptying.
