it
’
ll enter the kit selection mode automati-
cally while the KIT button indicator will light
up. The kit number and its name will be
displayed. The kit number also appears in
the second row of the display.
In some other operation modes, you may
press the KIT button to enter the kit select
operation mode.
PRESET KIT
The title of the kit number section in the sec-
ond row of the display is
“
KIT
”
for preset kit.
The kit number is ranged 01 - 50.
Rotate the Data knob to select a kit you
desire. Rotate the knob clockwise to increase
the kit number and anticlockwise to decrease
the kit number. All preset kit number and
name are listed in the Appendix KIT LIST.
USER KIT
You can create your own user kit by edit
function. Click the KIT button repeatedly will
switch the Preset Kit and User Kit selection.
The User Kit number is U01 - U30. The title
of the kit number section in the second row
of the display is
“
USER KIT
”
.
Rotate the Data knob to select an user kit
you desire. Rotate the knob clockwise to in-
crease the kit number and anticlockwise to
decrease the kit number.
The factory setting for all User Kits is Uni-
versal Kit. You could call them even if you
don
’
t create your own user kit. Of course,
you could replace it by editing. Please see
<EDIT> Chapter in this manual for details.
Press the KIT button again to back to the pre-
set kit.
DRUM KIT
There are 50 preset drum kits and 30 User Kits. The kit is combination of different instrument voice
assigned to each pad which has unitary style for performance. All the kits are for your choice. Any
kit could be edited and saved as your own User Kit. After power on and display initial information,
Standard
Preset kit indicator Kit number Kit name
UserKit01
User Kit indicator
Note:
When use these 9 buttons
as numeric button, the indicator of
the EDIT button must be off, be-
cause they are dual-function
buttons. Please see <EDIT> Chap-
ter in this manual for details.
13
QUICK SELECTION
There are 9 numeric buttons, each one is as-
signed to a most common use kit. In the kit
select mode, simply press a button to select
kit directly. The default quick selection as-
signment is listed in the Appendix <KIT LIST>.
After you select a kit, you could assign it to a
numeric button by pressing the KIT button and
a numeric button simultaneously.
Your assignment is nonvolatile even the
power turns off.
