SETUP
Advanced
6. Advanced Parameter Edit
Chapter DRUM KIT EDIT introduces the sound
edit procedure. The purpose of the sound edit is
to change sound characteristics such as voice,
volume, pan etc. The target of advanced param-
eter edit is physical characteristics of pad such
as sensitivity, trigger curve etc.
When the item name of Advanced is blinking,
press the ENTER button to confirm it. Then, the
EDIT icon will appear and the default parameter
Sensitivity will be shown and blinking.
You could change parameter by rotating the
DATA knob.
Any parameter is assigned for each pad
individually. You must select a pad to edit. The
default pad is Tom1 with its icon blinking. You
may select pad to setup by pressing the pad
select button or strike the pad directly. The icon
of selected pad will blink as well.
Note:
1. There is no alternative part such as rim, edge
can be selected. The mark under the pad icon
will never appear. It is different from part selec-
tion procedure in DRUM KIT EDIT.
2. Hi-Hat pedal is not available for advanced edit.
After select the parameter and pad, press the
ENTER button to confirm. The current value of
the parameter will appear and blink. Now, you
can change the value.
There are 4 advanced parameters can be edited.
They are:
Sensitive
Sensitivity
The pad sensitivity is ranged 1-127. Rotate
the DATA knob to change it. The higher value
refers to the higher sensitivity. Please note
that if the sensitivity is too high, it
’
ll cause
unexpected sound even if you don
’
t strike the
pad. Press the ENTER button to confirm your
setting and turn to the next parameter. Press
the EXIT button to exit current operation and
back to Advanced window.
Sensitive
25
