KIT 01
Pop
A drum kit consists of drum pads, cymbals pads and Hi-Hat pedal physically, which generate sound
in different way such as by striking head or rim of drum pad, striking cymbal bow or edge, press-
ing Hi-Hat pedal. We call the source to generate sound as Part, for example, the part generating
sound by striking the head of Tom 1 pad is displayed on the screen as Tom1, the part generating
sound by Hi-Hat control pedal is displayed on the screen as Pedal Hi-Hat etc. The detailed
description is listed in Table 1 below.
Each part has multi parameters to determine its sound characteristics such as voice, volume,
reverb level and pan etc. These parameters are listed In Table 2.
The edit feature is to set parameter for each part, partly or for all parts in a kit. Obviously, assigning
voice to the part is most impotant function. This drum has totally 492 voices can be select and
assigned with this function.
Crash-R - Edge of Crash
Ride - Head of Ride
Ride-R - Edge of Ride
Open HiHat - Hi-Hat open
Close HiHat - Hi-Hat close
Pedal - Hi-Hat Control pedal
Kick - Kick
DRUM KIT EDIT
This feature makes it possible to change the currently selected drum kit setting. In this way, you
may create your own drum kit and save it as UserKit.
The edit procedure is the same for every parameter, after you are familiar with the operation of
voice assignment; it
’
ll be easy to edit other parameters.
The following section is the edit procedure taking example how to change voice for a pad.
1. Select kit for editing
Select a kit for editing in the same way explained in the DRUM KIT chapter. The display shows the
kit number and kit name.
Tom1-R - Rim of Tom1
Tom2 - Head of Tom2
Tom2-R - Rim of Tom2
Tom3 - Head of Tom3
Tom3-R - Rim of Tom3
Tom1 - Head of Tom1
Snare-R1 - Rim1 of Snare
Snare - Head of Snare
Table 1
Snare-R2 - Rim2 of Snare
Crash - Head of Crash
12
