SETUP
In the Advanced parameter select window, press the EXIT button to back to the SETUP item
selection window. If you did some changes during the Advanced setting, the changes will be saved
automatically. The display will say
“
Saving...
”
.
The settings saved is nonvolatile even the power turns off.
Then, press the pedal to position you desire as closs threshold while the real threshold value will be
shown and blinking.
Press the ENTER button to confirm and turn to the bottom threshold setting; the parameter is Pedal
THR.
Then, set the Pedal threshold in the same way above.
Hi-Hat Pedal setup
PEDAL ADVANCED
Pedal THR 30
Press the ENTER button to confirm.
Press the EXIT button to exit current operation and
back to Advanced parameter select window.
Pedal THR value
21