TAKING CARE OF YOUR DRUM
w
direct sunlight (near a window),
w
high temperatures (near a heat source,
outside, or in a car during the daytime),
w
excessive humidity,
w
excessive dust,
w
strong vibration.
w
The drum contains digital circuitry and
may cause interference if placed too
close to radio or television receivers. If
interference occurs, move the drum
further away from the affected
equipment.
POWER
w
Turn the power switch off when the
drum is not in use.
w
To avoid damage to the drum and other
devices to which it is connected, turn
the power switches of all related de-
vices off prior to connection or discon-
nection of audio cables.
w
Turn the power off if the main cable is
damaged or the instrument is spattered
with liquid.
w
Do not switch the unit on and off in quick
succession, this places an undue load
on the electronic components.
w
Unplug the AC power cord during an
electrical storm.
w
Avoid plugging the AC adaptor into the
same AC outlet as appliances with high
power consumption, such as electric
heaters or ovens.
SERVICE AND MODIFICATION
This product should be serviced by qualified
service personnel when,
w
the power supply cord or the plug has
been damaged,
w
liquid has been spattered into the unit or it
has been exposed to rain,
w
the instrument does not appear to operate
normally or exhibits a marked change in
performance,
w
the instrument has been dropped or the
cabinet has been damaged.
w
Do not attempt to open the unit or make
any change in the circuits or parts of the
unit.
HANDLING AND TRANSPORT
w
Never apply excessive force to the
controls, connectors, pads or other parts
of the instrument.
w
Always unplug cables by gripping the plug
firmly, not by pulling on the cable.
w
Physical shocks caused by dropping,
bumping, or placing heavy objects on the
instrument can result in scratches and/or
more serious damage.
w
Carefully check the amplifier volume
control before stating to play. Excessive
volume can cause permanent hearing
loss.
CLEANING
w
Clean the unit with a dry or light-wet soft
cloth. Do not use paint thinner or petro-
chemical based polishes.
LOCATION
Do not expose the drum to the following condi-
tions to avoid deformation, discoloration, or
more serious damage,
DO NOT ATTEMPT TO OPEN THE UNIT OR MAKE ANY CHANGE IN THE CIRCUITS OR
PARTS OF THE UNIT
.
!
