In some other operation modes, you may press
the KIT button to enter the kit select operation
mode.
PRESET KIT
The preset kit number is ranged 01 - 55.
Rotate the Data knob to select a kit you desire.
Rotate the knob clockwise to increase the kit
number and anticlockwise to decrease the kit
number. All preset kit number and name are listed
in the Appendix KIT LIST.
Note:
Normally, striking the drum pad makes
single sound. When you play the Tom rim or Kick
with Kit 22/23/24/25/26, an additional voice will
be added to the basic drum sound. The additional
sound is composed in a sequencer for these spe-
cific kits. Each time you play the pad, the addi-
tional sound will change in sequence.
USER KIT
You can create your own user kit by edit function.
Click the KIT button repeatedly will switch the
Preset Kit and User Kit selection. The User Kit
number is 56 - 90; the User Kit name is UserKit01
- UserKit30.
Rotate the Data knob to select an user kit you
desire in the same way above.
The factory setting for all User Kits is the same
as preset kit 01. You could call them even if you
don
’
t create your own user kit. Of course, you
could replace it by editing. Please see <EDIT>
Chapter in this manual for details.
QUICK SELECTION
In the Kit mode, ten pad selection buttons are de-
fined as quick kit selection buttons. Each one is
assigned to a most common use kit. Simply press
a button to select kit directly. The default quick
selection assignment is listed in the Appendix
<KIT LIST>.
After you select a kit, you can assign it to a quick
KIT 01
Standard
DRUM KIT
Kit number
Kit name
Kit 56
UserKit01
User Kit name
There are 55 preset drum kits and 35 User Kits. The kit is combination of different instrument voice
assigned to each pad which has unitary style for performance. All the kits are for your choice. Any
kit could be edited and saved as your own User Kit.
After power on and display initial information, it
’
ll enter the kit selection mode automatically while the
KIT button indicator will light up. The kit number and its name will be displayed.
Kit number
selection button by pressing and holding down
the KIT button then pressing a pad button.
Your assignment is nonvolatile even the
power turns off.
Note:
These buttons are dual-func-
tion buttons. When use them as
quick kit select buttons, the indica-
tor of the EDIT button must be off,
Please see <EDIT> Chapter in this
manual for details.
1
2
3
5
6
7
8
9
10
4
+
+
9
