- 23 -
RECORDER SET UP
You have many optional setup items. When the item name
blinks, rotate the Data knob to select then press the EN-
TER button to confirm and its parameter data will blink.
Use the Data knob to change data; then press the EN-
TER button to confirm your setting and turn to the next
item.
Tip:
If you don
’
t want to change the current setting
of an item, press the ENTER button to skip it and
turn to the next item.
Press the button to start recording immediately. The
settings you have done will go into effect. Press the EXIT
button to back to the entry of the Record window.
PHRASE
2. Record with Sophisticated Setting
If you want to change some of the default settings, for
example, increase the measure, add accompaniment,
change the recording mode, even change the kit and ef-
fects setting, you need to enter the Record Setup window.
In the Kit select window, press the button to enter the
record entry window. The indicator flashes and the
PHRASE indicator light up.Then, press the SETUP but-
ton to start record setup.
Note:
The phase number in the right side of the
screen will be
“
- -
”
.
3. Recording Based on a Phrase
If you already have phrase recorded, you could edit it or
use its frame for new recording. In the kit selection window,
press the PHRASE button to enter the phrase select
window. Use the Data knob to choose a phrase. The phase
number will be displayed in the right side of the screen as
well.
You can listen this phrase in advance by pressing the
button and press the button again to stop it. Then,
press the button to enter the record entry window for
editting.
If you want edit this phrase with setting changes, or cre-
ate new phrase based on current frame, press the SETUP
button to enter the record setup window.
Please refer to the <RECORD SETUP> section of this
chapter for more information.
Over Dub
Note:
The phase number in the right side of the
screen will be
“
- -
”
.
Record
SETUP
ENTER
EXIT
Clear
Phrase
G.BOX
CLICK
PHRASE
SETUP
ENTER
EXIT
Phrase
Record setup item Phrase number
KIT
Record setup item
Select phrase