1
2
3
4
DC 5V
PC / HD
OUTPUT
MENU
+
-
PC / HD PC / HD
3.2 Rear Panel
2
3.1 Front Panel
1
2
PC / HD
BYPASS
PC / HD
IN
3. Operation Controls and Functions
①
PC/HD Bypass: Bypass the PC/HD input signal.
②
Input: Connect the PC input D-Sub (15-pin) port to the D-Sub output port
of your source equipment such like PC.
①
Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
②
PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
③
Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
④
+/- Button:
1. On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2. Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Outside of the OSD menu, press [-] button to active the Auto
Adjust function. The screen will show Auto Adjust.
Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and then [ + ] to switch to XGA mode.
