GDS-600
– System Installation
37
6. Install the G2-IPU2 (HDLC chip on U17) in the IPU slot of each cabinet.
Note: The G2-IPU2 is for multi-cabinet use. The G2-IPU is only for single cabinet use.
7. Install the G2-IXU in the IXU slot of each cabinet (G2-MMD640 and G2-EMD80).
8. Connect the expansion cable (short red 1) from the G2-MXU8 to the G2-IXU in the 1
st
cabinet as below.
Connect the expansion cable (long red 2) from the G2-MXU8 to the G2-IXU in the 2
nd
cabinet as below.
…………………………………….
Connect the expansion cable (long red 7) from the G2-MXU8 to the G2-IXU in the 7
th
cabinet as below.
Connect the expansion cable (long red 8) from the G2-MXU8 to the G2-IXU in the 8
th
cabinet as below.