USER MANUAL - ALTIUM15 /12,
2000W SELF-POWERED FULL RANGE SPEAKER
PAGE 3
PAGE 2
SYMBOL ALERTING THE OPERATOR TO FOLLOW IMPORTANT OPERATING
INSTRUCTIONS AND PRECAUTIONS DETAILED IN THIS DOCUMENT.
Do not spill water or other liquids into or on the speaker, or operate the speaker whilst
under wet or damp conditions.
Do not remove the aluminium panel of the speaker. Removing this panel will expose you
to potentially dangerous voltages. There are no user-serviceable parts inside.
Do not use the speaker if the electrical power cable is frayed or damaged. The power
supply cable should be routed so that it is not walked upon or pinched by objects close by.
Only use the original power cable supplied with your speaker.
Do not connect the input or output connectors of your speaker to any other voltage
sources such as batteries, mains power or power supply units, regardless of whether the
Speaker is switched on or off.
During long periods of no use, the power cable should be unplugged from the mains
voltage outlet.
Precaution should be taken so that the earth connection is not defeated.
Never use your speaker near heat radiating appliances such as stoves
and heaters.
Ensure that power outlets and mains voltage conform to the power requirements printed
on the back panel of the speaker.
Do not apply an input signal that is much greater than that which is required to achieve
maximum output level. This may damage the pre-amplification stage circuitry.
Always operate the speaker with the AC earth wire connected on both sides
(Speaker and Mains).
Ensure that power outlets and mains voltage conform to the power requirements printed
on the back panel of the speaker.
Do not operate your speaker on a surface or environment which may impede the normal
flow of air around the speaker.
SYMBOL WARNING THE OPERATOR THAT UNINSULATED, DANGEROUS VOLTAGES
ARE PRESENT WITHIN THE ENCLOSURE THAT MAY POSE A RISK OF ELECTRIC
SHOCK.
- The power supply cord or plug/s have been damaged.
- Liquids have been spilled inside the speaker enclosure.
- The speaker has been exposed to rain or excessive moisture.
- The speaker does not appear to operate normally, or exhibits a reduction in performance.
- The speaker has been dropped or the enclosure is damaged.
Save the carton and packing material even if the speaker has arrived in perfect condition.
Should you ever need to ship the speaker for servicing, use the original packaging supplied.
After long periods of no use, the power cable should be inspected for any damage before
using the speaker again.
Read all documentation before operating your speaker. Retain all documentation for future
reference.
Your speaker should be serviced only by qualified service personnel. Contact your nearest
official retailer should your speaker need technical attention.
If the speaker is used in an extremely dusty or smoky environment, the amplifier should
periodically be blown free of foreign matter.
Follow all instructions printed on this user manual and the back panel of the speaker for
proper and safe operation.
Your speaker should be serviced by a qualified service technician when:
PAGE 3
PAGE 2
IMPORTANT PRECAUTIONS
