Turn on the unit, press the
MENU
button, and press the
UP
/
DOWN
button until the required function
is shown on the monitor. Select the function by the
ENTER
button. Use the
UP
/
DOWN
button to
choose the submenu, press the
ENTER
button to store and automatically return to the last menu.
The main functions are shown below (the grey boxes are preset settings
）
:
Home Position Adjustment
Address
001
DMX address set
Run Mode
DMX 15CH/9CH
9/15 channels select
Slave
Slave 1-Slave 4
Auto
Auto mode
Sound
Sound mode
IR
None
Manual
-----Pan----------------0~255
Pan movement 0-540 degrees
-----Pan Fine-----------0~255
Tilt movement 0-270 degrees
-----Color--------------0~255
Select Colour options
-----Gobo---------------0~255
Select Gobo options
-----Gobo Rotate------0~255
Rotate gobo
-----Prism---------------0~255
Select prism and rotate
-----Focus---------------0~255
Manual adjust focus
-----Zoom--------------0~255
Manual adjust Zoom
-----Dimmer--------------0~255
Set dimmer value
-----Shutter----------0~255
Set shutter and strobe
Setup
Pan Reverse---------------YES/NO Pan normal or Reverse
Tilt Reverse--------------YES/NO
Tilt normal or Reverse
Screen Reverse------------YES/NO Display normal or Reverse
Pan Angle------------540/360/180 Pan angle selection
Tilt Angle------------270/180/90
Tilt angle selection
Totem mode----------
OFF/UP/DOWN
Set pan/tilt angle
Sensitivity--------0-100
Set sound sensitivity
Reset---------YES/NO
Reset the device
Factory Set---------YES/NO
Load factory default
SysInfo
Ver: V1.0
Software version
Running Mode: DMX
Current running mode
DMX Address: 001
Current dmx address
Temperature: Open
None
