4A
1 Microphone
：
Receive music for the sound active.
2 Dial-up
：
4 DMX output
：
For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
3 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
5.FUSE.
6.ins input
：
Connect to supply mains power.
7.ains output
：
Connect to supply mains power for the next unit.
5. How To Control The Unit
Two ways to operations:
A. Master/Slave operation
B. Universal DMX controller
A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit
（
Master
）
must be turned Dip
switch 9 on,then will control the others to give a coordinate automatic light show and it’s
good for instant shows. In this mode, the other unit
（
Slave
）
must be turned Dip switch 10 on.
The first unit is easy to recognize by nothing in its DMX input jack. The others of chains
(Slave) will have DMX cables plugged into the DMX input jacks (daisy chain).
