background image

Hybrid Systems JSC 

 

Users Manual 

Page 7 of 8 

 

GSM 108 Gate 

used to make any calls. If users dial telephone numbers, the Warn indicator will flash 

and the telephone will give out the sound of three -time toot to ask the user to hang 
up.  

While users dialed barred numbers or other error numbers, the telephone gives 

out the sound of three-time toot to indicate that user should hang up and redial.  

While you are lifting the handset and don’t dial any key for continuous 15 

seconds or nobody answer the dialed telephone for 90 seconds after the called 

telephone has ringed, the telephone will give out the sound of three-time toot to 
indicate the user to hang up. If the user doesn’t hang up for a long time, all indicating 

sound will stop after 1 minute.  

While calls coming in, Used indicator flashes. IF user answers the call, the Used 

indicator stays lit until the call is hung up.  

When user is lifting the handset, Used indicator stays lit until user hangs up.  

When the terminal receives SMS, Warn indicator and Used indicator both stay lit that 
indicates that the terminal is dealing with SMS.  

If Warn indicator stays flashing and the telephone continuously gives out the 

sound of three-time toot, which indicates that the terminal is on the warning status. 

Please hang up.  
 

 

Technical Specification  

 

 

Working condition Environment temperature: 0~+50 

 

Relative humidity: 10%~95% 

 

Air pressure: 86~106kpa 

 

Environment yawp: 

60Db (A)  

 

Working frequency: GSM900/GSM1800MHz  

 

Stability of frequency: better than 2.5PPM  

 

Signal sensitivity: -103DbM  

 

Transmit power: <2w  

 

Power Supply: 220v±15% AC  

 

The maximal distance between terminal and telephone: 100M  

 

Maintenance and storage  

The terminal should be saved in the desiccant place.  
If three are some matters with the terminal, please send it to the appointed 

repair center. (The damages that are caused by error operation are beyond the scope 
of our free maintenance). Don't take apart the terminal by yourself without our 

agreement  

The packed terminal should be put in dry and ventilated place. The number of lays 

of piled terminal can’t more than 10. The condition of the storehouse is listed as 
follows:  

 

 

Temperature: -10 to +45 

 

Relative humidity: 

95%  

You should ensure that there is no corrosive gas in the storehouse too.  

 
 

 
 

 
 

 
 

Summary of Contents for GSM 108 Gate









Reviews: