SIP-6002 User Guide
5
It is possible that this product has been pre-setup by either a service provider or
network manager. Then user’s own configurable settings can be very limited. However,
if end user is allowed to make changes to the system and service settings, the following
are the instructions for your device setup.
End user needs to get the following information from his/her service provider or
network manager,
IP address: if it is static, subnet and network gateway IP address, or user DHCP.
SIP proxy server IP address and any registration information.
User information such as user ID and password.
3.1 Setup with Keypad
Pressing “**00” to enter SIP-6002 setup menu. You can use keypad referencing
following menu to do basic network setup. Please use web browser to do more
advance setup.
Option
Code
User Input
Notes
============================================================
Enter configuration menu
**00
None
After “Setup menu”,
enter option and end
by “#”
-----------------------------------------------------------------------------------------------------
Check DHCP
10
None
Announce DHCP
Status on or off
-----------------------------------------------------------------------------------------------------
Set DHCP
11
1 to enable
Press “#” to confirm
0 to disable the input
-----------------------------------------------------------------------------------------------------
Check IP Address
20
None
-----------------------------------------------------------------------------------------------------
Set static IP Address
21
Enter value using End input
numbers on the
by ‘#’
telephone pad.
Use‘*’when enter
a decimal point.
-----------------------------------------------------------------------------------------------------
Check Subnet Mask
30
None
-----------------------------------------------------------------------------------------------------
3. Setup Guide
