3. Assemble the following parts using 6 #8 sheet metal screws. Both “B” panels should fit inside of “C” and “A” panel flanges. Attach
“C” (bottom panel) to “B” (side panels). After the top and sides are assembled, attach ”A” (top panel) using 6 #8 sheet metal screws
provided.
)
6
Top
Panel
(
A
)
#8 Sheet Metal Screw
Bottom
Panel
(C)
Side
Panel
(
B
)
Side
Panel
(B)
4. Position the assembled filter box on rear of furnace, supporting it firmly up to electrical enclosure, covering the rear distribution blower.
Make sure the filter box is tightly pressed to the back of the furnace. Use
6 #8 self-tapping screws
(included) to firmly attach the filter box
to sides of
furnace.
Filter Box
