HY16F3981
IDE
Hardware User’s Manual
© 2017~2022 HYCON Technology Corp
APD-HY16IDE012-V02_EN
page8
Mini Link LED Description:
POWER LED (Green LED): When the USB Port connection, POWER LED will
continue to light.
ACTIVE LED (Yellow LED): When enter Debug Mode, ACTIVE LED will flash
continuously.
ERROR LED (Red LED): When the USB Port is connected but the Target Board is not
connected, the Error LED is on.
4.3. Mini Link connection with EDM
HY16F
Mini Link
EDM line
Target Board EDM
1
2
RST (Blue)-> Target board EDM Pin2
VDD (Red)-> Target board EDM Pin7
ECK(Green)-> Target board EDM Pin6
EDIO(Yellow)-> Target board EDM Pin4
VSS(Black)-> Target board EDM Pin3,5
4.4. Connection Diagram of Mini Link and Target Board (Powered by Mini Link)
Step1: The EDM Line Connection Mini Link and Target Board.
Step2: Connect the PC's USB Port to the Mini Link.
Step3: The Power LED is on.
STEP1
STEP2
STEP3
.
