HY16F3981
IDE
Hardware User’s Manual
© 2017~2022 HYCON Technology Corp
APD-HY16IDE012-V02_EN
page13
7. Hardware Connection Introduction
For driver install, please refer to HY16F Series, IDE Software User’s Manual.
AICE USB driver program will install automatically when the software is installed.
For correct AICE connection status, libusb-win32 devices of AICE
(which is Mini Link)
will
show up under PC device administrator.
EDM connection test:
1.
Connect the Mini Link to the Target Board according to Section 4.4
2.
Open the AndeSight IDE software. (Please refer to installation HY16F series IDE
software installation steps)
(2.1)
In the Target Manager: Local Targets window
(2.2)
Select HY16F3981 by right-clicking (Select Connect Target via AICE)
(2.3) Successful connection appears HY16F3981 AICE: 9902
(2.4)
From the Console window, can see the version information of the Mini Link:
Andes AICE-MINI v1.0.1
.
