3
−
9
25
Safety and accident prevention
Vibration emission
This sawing machine complies with the norms EN1299 and EN1033, as the
machine vibration emission on the devices controlled by the operator does not
exceed the threshold of 2.5 m/s
2
Electromagnetic compatibility
As from 1 January 1996 all electrical and electronic appliances bearing the CE
marking that are sold on the European market must conform to Directive
2014/30/UE e 2014/35/UE and
EEC MACHINES DIRECTIVE 2006/42/CE
. The
prescriptions regard two specific aspects in particular:
1. “EMISSIONS: during its operation, the appliance or system must not emit spurious
electromagnetic signals of such magnitude as to contaminate the surrounding
electromagnetic environment beyond clearly prescribed limits”;
2. “IMMUNITY: the appliance or system must be able to operate correctly even when
it is placed in an electromagnetic environment that is contaminated by disturbances
of defined magnitude”.
The following text contains a list of the applied standards and the results of the
electromagnetic compatibility testing of machine model
DM-1215
; Test report
no. 170201.
Emissions
EN 61000
−
6
−
4 (2002) Electromagnetic Compatibility (EMC)
−
Generic standard
regarding emissions. Part 6
−
4: Industrial Environment.
EN 55011 (1999) Industrial, scientific, and medical radio frequency appliances
(ISM). Characteristics of radio frequency disturbance
−
Limits and methods of
measurement.
EN 50370
−
1:2005 Electromagnetic compatibility (EMC)
−
Product family standard
for machine tools
−
Part 1: Emission
CONDUCTED EMISSIONS
Gate A
Freq. (MHz)
Q-peak limit (dBuV)
Mean value limit (dBuV)
Result
A.C. power supply
input
0.15 - 0.5
0.5 - 5
5 - 30
79 - 73
(linear reduction with
log of frequency)
73
73
66 - 60
(linear reduction with log of fre
quency)
60
60
Complies
CONDUCTED EMISSIONS - ANALYSIS OF INTERMITTENT DISTURBANCES
Gate
Result
A.C. power supply input
Not applicable
IRRADIATED EMISSIONS
Gate
Freq. (MHz)
Q-peak limit (10 m)
(dBuV/m)
Result
Enclosure
30 - 230
230 - 1000
40
47
Complies
Summary of Contents for DM-1215
