ETS 4100S IO-Link
5
Edition: 2020-07-20
HYDAC ELECTRONIC GMBH
Part no.: 670032
E
1
General safety notice
Before commissioning, check the instrument and any accessories supplied. Before
commissioning, please read the operating instructions. Ensure that the instrument is suitable
for your application.
If the instrument is not handled correctly, or if the operating instructions and specifications are
not adhered to, damage to property or personal injury can result.
2
Exclusion of liability
This operation manual was made to the best of our knowledge. Nevertheless, and despite
the greatest care, it is possible that they may contain errors. Therefore, please understand
that in the absence of any provisions to the contrary hereinafter our warranty and liability –
for any legal reasons whatsoever – are excluded in respect of the information in this operating
manual.
In particular, we shall not be liable for lost profit or other financial loss. This exclusion of liability
does not apply in cases of intent and gross negligence. Moreover, it does not apply to defects
which have been deceitfully concealed or whose absence has been guaranteed, nor in cases
of culpable harm to life, physical injury and damage to health. If we negligently breach any
material contractual obligation, our liability shall be limited to foreseeable damage. Claims
due to the Product Liability shall remain unaffected.
In case of translation, only the original version of the operating manual in German is legally
valid.
3
Warranty
The ETS 4100S temperature sensor series are subjected to individual calibration and final
testing on a computer-operated test station. They are maintenance-free and operate perfectly
when used according to the specifications (see Technical Data).
However, if there is a cause for complaint, please contact HYDAC Service. Interference by
anyone other than HYDAC personnel will invalidate all warranty claims.
As a basic principle, the “General Terms and Conditions“ of the HYDAC ELECTRONIC
GMBH apply. These are available to the user as of the time of order confirmation or
contracting.
The general terms and conditions can also be found under:
www.hydac.com/de-en/company/general-terms-and-conditions
4
Safety
4.1 Definition of symbols and instructions
The symbol means that death, serious injury or major damage to property
could occur if the stated precautions are not met..
WARNING !
