6
HLT 2100 / HLT 2500 SSI
Edition: 2017-08-31
HYDAC ELECTRONIC GMBH
Part No.: 669999
E
1.4 Declaration of manufacturer
The measuring systems were developed, designed and manufactured under observation
of the applicable international and European standards and directives.
A corresponding manufacturer’s declaration can be requested from HYDAC
ELECTRONIC GMBH.
The manufacturer of the product, HYDAC ELECTRONIC GMBH, operates a certified
quality assurance system in accordance with ISO 9001.
1.5 Abbreviations and definitions
HLT
Linear-Absolute Measuring System
SSI
S
ynchronous
S
erial
I
nterface:
EC
E
uropean
C
ommunity
EMC
E
lectro
M
agnetic
C
ompatibility
ESD
E
lectro
S
tatic
D
ischarge
IEC
I
nternational
E
lectrotechnical
C
ommission
NEC
N
ational
E
lectrical
C
ode
VDE
V
erein
D
eutscher
E
lektrotechniker (German Electrotechnicians Association)
2 General Safety Precautions
2.1 Definition of symbols and instructions
means that death, serious injury or major damage to property could occur
if the stated precautions are not met.
WARNING !
means that minor injuries or damage to property can occur if the stated
precautions are not met.
CAUTION !
indicates important information or features and application suggestions
for the product used
means that appropriate ESD-protective measures must be considered
according to DIN EN 100 015-1.
(Cause of a potential equalization between body and device-mass as well
as the housing-mass about a high-impedance resistance (approx. 1
MOhm) e.g. with a commercial ESD wrist strap).
Summary of Contents for HLT 2100-R1
Page 79: ...Notizen Notes Notes ...
Page 80: ...Notizen Notes Notes ...
