HLT 2100 / HLT 2500 SSI
19
Edition: 2017-08-31
HYDAC ELECTRONIC GMBH
Part No.: 669999
E
8 Packaging / Transport
Notes on packaging
Only use the original packaging!
The wrong packaging material can cause damage to the device during
transportation.
Notes on transportation
Do not drop the device or expose it to strong strokes!
Device contains a magnetostrictive sensor.
Only use the original packaging!
The wrong packaging material can cause damage to the device during
transportation.
9 Order details
HLT 2 X 0 0 – XX – XXX – S16 – XXXX – XXX – XXX - 000
Design/Geometry type
1 = Rod (only in conjunction with type R1)
5 = Profile (only in conjunction with type F1, L2)
Design
F1 = Flat profile, without magnetic guidance
L2 = Profile design, with magnetic guidance, joint on top
R1 = Rod with M18x1.5 installation flange
Electrical connection
S00 = CONTACT male connector, 12 pole
M07 = Male M16, 6 pole (not available for HLT 2500-F1)
M08 = Male M16, 8 pole (not available for HLT 2500-F1)
Output signal
S16 = SSI
Measuring range in mm (50 to 4000 mm)
Example
0150 = 150 mm
Code
B24 = Binary code 24 Bit
B25 = Binary code 25 Bit
G24 = Gray code 24 Bit
G25 = Gray code 25 Bit
System System AuflösungResolution
For HLT 2100-R1 and HLT 2500-L2:
For HLT 2500-F1:
001 = 1 µm
050 = 50 µm
002 = 2 µm
100 = 100 µm
005 = 5 µm
150 = 150 µm
010 = 10 µm
200 = 200 µm
100 = 100 µm
Modification
000 = Standard
Summary of Contents for HLT 2100-R1
Page 79: ...Notizen Notes Notes ...
Page 80: ...Notizen Notes Notes ...
