E
E
23
22
D/E/F 18.063.H0/02.06
D/E/F 18.063.H0/02.06
6. Technical specifications
Sensor inputs:
The HMG 500 has two analogue inputs on 2 input connections (channel A
and B) for connecting HSI sensors with automatic sensor recognition (pressure,
temperature and flow rate transmitters).
Channel A and B:
z
Automatic sensor recognition for HSI sensors (pressure, temperature or flow
rate transmitters) and setting of measuring range and unit of measurement
z
Measured value differential for channel A - B
Measurement accuracy of the input channels:
z
≤
± 0.1% of the measuring range
Measurement rate:
z
0.1 ms
Measurement & display:
z
Actual measured value
z
Min/max values
z
Measured value differential
z
Change of the unit of measurement
Operating time using 9V battery (2 sensors):
z
approx. 10 hours.
Dimensions and weight :
z
Dimensions: 100 x 170 x 40 mm
z
Weight:
410 g
Operating/Ambient conditions:
z
Operating temperature: 5 .. 60 °C
z
Storage temperature:
- 40 .. 70 °C
z
Rel. humidity:
0 .. 70 %
Technical standards:
z
EMC: EN61326-1+A1+A2
z
Safety: EN61010
z
Protection class IP40
"Mode"
press 1 x
⇒
SEnA
press 2 x
⇒
SEnb
Pressing the
arrow keys
next to
"Mode" takes you to the individual
possible units of measurement
for
Pressure:
bar, PSI, MPA
Temperature:
°C, K, F
Flow rate:
l/m(in), g/m(in)
1 g (US gallon) =
3.7853 l
Select one of these.
"Mode"
press 3 x
⇒
VErS
V00 R05
(Display of SoftwareVersion)
Please quote this if you have a
complaint about the unit.
Pressing the Mode key again brings
you back again to the display of the
actual measured value.
If other makes of sensor are
connected to the HMG 500, the
following message appears in the
display:
"err"
The HMG 500 switches off
automatically when the unit is not
used for 15 minutes.
