MRFD2N
Safety information and instructions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 8 / 32
MoWa MRFD2 3312153b en-us 2012-08-08.doc
2012-08-08
Safety information and instructions
These installation and maintenance instructions contain the key instructions for
properly and safely operating the MRF.
Obligations and liability
The basic prerequisite for the safe and proper handling and operation of the MRF is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the MRF.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the MRF.
The MRF has been designed and constructed in accordance with the current state
of the art and recognized safety regulations. Nevertheless, hazard may be posed to
the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
Use the MRF:
solely for its designated use
only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. They are made available to the owner
upon concluding purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
improper use of the MRF or use deviating from its designated use
improper assembly, installation, commissioning, operation and maintenance of
the MRF
modifications to the MRF made by the user or purchaser
improperly performed repair work
Always keep these instructions near the unit.
In addition to the operating instructions, the general and local regulations on
accident prevention and environmental protection are to be made available and
observed.
Make sure that the safety and hazard symbols and warnings on the unit are always
in a legible condition.
Summary of Contents for MRFD2N
Page 31: ......
