MRFD7 Unpacking
MRF
Dangers by pressure in the hydraulic system
WARNING
Hydraulic systems are under pressure
Bodily injury
►
The hydraulic system must be depressurized
before performing any work on the hydraulic
system
MRF modification
Do not make any modifications (design modifications, extensions) to the MRF
without the prior consent of the manufacturer.
Immediately replace any unit components which are not in perfect condition.
Use only original spare parts (OEM).
Unpacking MRF
When receiving and unpacking the unit check it for damage in transit. Report any
damage to the forwarding agent immediately.
The connectors/ports are closed off so that no contamination can enter the unit
while it is in transit.
Dispose of the packaging material as appropriate for your area.
Storing the MRF
Store the filter in a clean, dry place.
Drain the filter housing completely before putting it into storage.
Check the external corrosion protection (paint coat) for damage, apply a new coat or
touch up the existing one as needed.
Wet the cleaned filter interior and all sealing surfaces such as the flange with a
suitable corrosion inhibitor, e.g. ANTICORIT 3 by Fuchs-DEA.
Storage temperature:
+5°C to +30°C
Humidity:
up to 50% relative humidity
HYDAC FILTER SYSTEMS GMBH
en
Page 11 / 36
BeWa MRFD7 3551097 us 2010-05-18.doc
2010-05-18
