FAM Description
FluidAqua Mobil - FAM10/15-P
en(us)
Page 22 / 124
BEWA FAM10-15-P 4052078 en-us 2015-11-05.doc
2015-11-05
Technical specifications
The FAM is able to dewater authorized fluids down to a water content of less
than 1000 ppm.
As an approximate guideline, the dimensioning of the FluidAqua Mobil can be
defined in accordance with the tank volume.
Tank volume in liters
Installation size
< 1,500
FAM5
1,000 – 7,000
FAM 10/15
7,000 – 15,000
FAM25
15,000 – 25,000
FAM45
25,000 – 35,000
FAM60
35,000 – 45,000
FAM75
> 45,000
FAM95
Generally speaking, however, it must be taken into account that the design
depends on the application, the fluid and the ambient temperature, the fluid
amount and the water input into the system.
These exercise a great influence over the dewatering performance. It is for
that reason that the specifications can serve only as a starting point.
The dewatering performance is dependent upon:
Dewatering
performance
Water content
Fluid temperature
Detergent additives
Volumetric flow of the FAM
Summary of Contents for FluidAqua Mobil FAM 10-P
Page 123: ......
