Measured values
HMG 4000
Edition 2016-03-08 - V01 R04
[31]
Part No.: 669950
7.3 Analogue inputs (A-H)
Under this menu point you have a
list of all of the analogue
measurement channels available in
the HMG.
To the left beside the corresponding
channel you will find a box which
you can use to switch the input on
and off. Active channels are marked
with a tick.
Depending on the settings, to the
right beside the box you will find the
sensor type (e.g. "HDA 4000"), the
sensor type (e.g. "analogue sensor") and
possibly a designation (e.g. "system pressure").
7.3.1 Mode
In field “
Mode
” you can set whether
a HYDAC HSI or SMART sensor with
automatic sensor detection or a
standard analogue sensor is
connected.
With automatic sensor detection,
the HMG 4000 applies all of the
information and values directly
from the connected HYDAC HSI or
SMART sensor.
With manual settings, you need to
manually enter the corresponding
information and values of the
connected sensor as described in
the following.
