Measured values
HMG 4000
Edition 2016-03-08 - V01 R04
[48]
Part No.: 669950
CANopen SDO
Service Data Objects (SDOs) are
used for changes in the object
folder and for status queries.
Data can be written to an OD
or read from one.
The following settings
are required for this:
Name
The entered name is used as the name of the measurement channel. If no name is
entered here, "
CAN channel x
" will be shown as the channel name.
Measurement range
Enter the lower and upper measurement range limit, unit and decimal format.
Resolution
Enter the value for the unit / bit.
Offset
Enter any offset there may be.
COB ID
Enter the COB ID (hex) (0 - 3FFFFFFF).
Index
Enter the index (hex) (0 - FFFF).
Subindex
Enter the subindex (hex) (0 - FF).
Transfer direction
Select the transfer direction (download / upload)
Number display
Select the used number representation (whole number / floating point number).
Bit length
Enter the corresponding bit length of the data (1 - 64).