Measured values
HMG 4000
Edition 2016-03-08 - V01 R04
[53]
Part No.: 669950
7.7.6 Measurement unit for
flow rate
Apply from sensor
l/min
USG/min
If "
Apply from sensor
" is selected,
the corresponding unit of the sensor
will be displayed.
If "l/min" or "USG/min" is active,
the measured value will be
converted into the corresponding
unit
The settings in this menu always apply to all analogue measurement channels and
all connected HSI sensors with automatic sensor detection!
This means, for example, that when "
psi
" is selected as the unit for the pressure
sensors, the measured values of all of the HSI pressure sensors connected to the
HMG will be shown in psi.
The HSI temperature and flow rate sensors behave accordingly.
The same also applies to the HCSI sensors connected to the device.