General
HMG 4000
Edition 2016-03-08 - V01 R04
[8]
Part No.: 669950
The device also offers measurement inputs for standard sensors with current and voltage
signals.
The HMG 4000 rounds off the application, providing two additional digital inputs (e.g. for
frequency or rpm measurements).
The HMG 4000 can render up to 100 measurement channels in total.
Depending on the type of sensor, there is an internal memory in the sensor for the
storage of recorded measurement data on a long-term basis. In addition, depending on
the sensor type, pre-set parameters can be changed and stored in the internal memory
as a sensor configuration.
The operator can intuitively access all of the unit’s functions and settings by means of
clearly presented selection menus. The HMG 4000 has a touchscreen similar to that of a
mobile phone or tablet computer for the purpose of entering number values and text.
When taking measurements of rapid, dynamic machine processes, all 8 analogue input
signals can be recorded simultaneously at a rate of 0.1 ms.
This function of course requires suitable fast sensors to be used.
The most impressing feature of the HMG 4000 is its ability to record the dynamic
processes of a machine in the form of a measurement curve and render them as a graph
— and, moreover, online and in real time.
The HMG 4000 is equipped with specially developed software providing for fast data
collection and processing. A measurement curve can comprise
up to 8 million measured values. The measured value memory for archiving this data can
record more than 500 measurement curves of this type.
Alongside simple measurement curves for single and endless recordings, the HMG 4000
has additional functions for recording event-controlled measurements and event logs.
There are various trigger options available for triggering events.
