CAN-Tools
HMG 4000
Edition 2016-03-08 - V01 R04
[98]
Part No.: 669950
13.2.6 Wizard
This function is only available to
HYDAC ELECTRONIC GmbH devices.
Using the help of the Wizard, you
can quickly and easily configure or
change the node ID or address and
baud rate of CANopen or J1939
devices of the HYDAC ELECTRONIC
GMBH.
In this respect, only one device
without an active load resistor may
be connected to the HMG 4000.
The values currently set in the device for node ID and baud rate as well as the
device status and configuration do not have to be known for the search to
function! All information is read out using the search function of the HMG 4000.
After tapping "
Continue
", the HMG
begins to search for connected
participants.