5 | Setting up / assembly / integration of the filter unit
HYDAC FILTER SYSTEMS GMBH
46 / 88
BeWa MFU-30E 4073898a en-us web
5.4.2 Connecting a filter unit with a power plug for
120/230 V AC, single phase
In the version for 120/230 V AC, the filter unit is delivered
ready for connection with a plug.
1.
Remove the connector cable from its holder and unwind
it completely.
2.
Before plugging in the power plug, make sure that the
main switch is in the 0 or OFF position.
3.
Check that the voltage and frequency are correct. You
will find the filter unit's electrical data on the electric mo-
tor's name plate.
4.
Plug the power plug into a suitable power outlet.
5.
Switch the filter unit on at the main switch.
ð
The motor pump group begins to pump.
6.
Switch the filter unit off at the main switch.
O
The filter unit is electrically connected.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for MFU-30E
Page 88: ...www hydac com ...