Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer:
The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should
be carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with all
current statutory requirements and the owner is given the current User’s Manual.
1. General
1.1 It is important these Installation and Maintenance Instructions are fully
adhered to.
1.2 These instructions cover only the Hydor product.
1.3 The Baffles are designed to fit onto the fan cases.
1.4 Baffles are specifically sized the fit the range of HV Belt Drive fans.
1.5 Baffles are constructed of galvanised or Aluzinc steel cases with black
polypropylene corrugated vanes.
1.6 Baffles can be fitted to both internal and external faces of the fan,
depending on the situation, and can reduce light ingress from 150,000 lux
to 0.1-0.15 lux.
1.7 This product is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person.
Young children should be supervised to ensure that they do not play with
the cover.
WARNING:
The fan must be isolated from the power supply when the
Baffle is being installed.
HV Light Baffle
incorrect
correct, minimum height 5mm
