Installation and Maintenance Instructions.
THESE INSTRUCTIONS MUST BE READ FULLY BEFORE COMMENCING INSTALLATION.
Owner / installer:
The life of this apparatus and its efficiency will be increased if
its use and maintenance is carried out in accordance with these instructions and
current statutory requirements. The installation and initial adjustments should be
carried out by a qualified and competent technician. Hydor Limited should be
consulted before substituting or fitting parts from another manufacturer. It is the
responsibility of the installer to verify that the installation is in accordance with
the following standards and the owner is given the current User’s Manual.
Any modifications to the fan or its installation, even the smallest
modification, change or elimination of security components or pieces that
influence the efficiency or loss of ventilation, will result in the CE Certification
and Hydor’s warranty being cancelled.
HV Mobile Belt Drive Fan
incorrect
correct, minimum height 5mm
Please take note of the following symbols used within this document:
Warning:
Hazards associated with electric current and high voltages
Important:
Important information
Hydor’s policy is one of continual improvement and the right to change a specification at any time
without notice is reserved. Whilst every care has been taken to ensure that the contents of this
document are correct at time of publication, Hydor shall be under no liability whatsoever in respect
of such contents.
Hydor cannot guarantee the operation of any equipment unless all documented instructions are
complied with, without variation.
Hydor is a registered trademark of Hydor Ltd and is a member of Elta Group. All other trademarks,
trade names or company names referenced herein are the property of their respective owners.
Summary of Contents for HV800
Page 6: ...Notes ...
Page 7: ...Notes ...
