15
OPTIONAL AIR/HYDRAULIC FOOT PUMP (700 BAR.)
SETTING INSTRUCTIONS
Connect the hose from the Swaging Head to the outlet connection of the pump (
Fig.7
).
Ensure pressure rating of the hose is suitable for 700 Bar operation.
AIR SUPPLY
Connect a suitable air supply to the air inlet connection of the foot pump as indicated.
N.B. The air must be supplied using a filtered and lubricated supply, regulated to a
MAXIMUM operating pressure of 7 Bar (100psig).
OPERATING THE FOOT PUMP
•
Press down the Foot Pedal to close the head and perform the swage.
•
Release the Foot Pedal when the Calibration Indicator reaches its set position.
•
To open the Head press down on the release part of the Foot Pedal.
The head
doesn’t need to be fully opened after each operation and can be stopped at any
position by releasing the Foot Pedal.
Fig. 7
