Page 4-3: Machine Maintenance
Boxxer H
2
O
The following maintenance is recommended by the manufacturer at the frequency indi-
cated.
AFTER EACH JOB
•
Check recovery tank, s/s filter and filter basket as required.
DAILY
•
Wipe machine down thoroughly with a damp cloth.
•
Flush recovery tank out thoroughly.
•
Empty filter basket and inspect for rips, tears, etc. Replace as needed.
•
Remove, thoroughly clean and reinstall stainless steel filter screen in
recovery tank.
•
Inspect and clean vacuum slot on recovery wand.
•
Check wand head for sharp edges that could tear carpet. File down
as needed.
•
Clean wand to maintain original appearance.
•
Wipe down vacuum hoses as needed.
•
Visually inspect hoses for cuts, etc.
WEEKLY
•
Wipe down entire unit as needed.
•
Apply good coat of auto wax to all painted surfaces inside and out, and
to control panel.
•
Thoroughly clean recovery tank using high pressure water.
•
Remove stainless steel filter in recovery tank and thoroughly clean, removing
all lint buildup. Inspect for damage and reinstall.
•
Remove filter basket. Thoroughly clean and reinstall.
•
Apply light coat of auto wax to wand.
•
Thoroughly clean vacuum hoses including hose cuffs.
•
Inspect for wear or damage to hoses and quick connect fittings.
