5-3: Machine Maintenance
Quarterly Maintenance
• Clean and gap the spark plugs to 0.030”. Replace if excessive carbon buildup is visible.
•
Check fuel filter. Replace as necessary.
100 Hours
• Replace spark plugs every 100 hours.
•
Change the blower oil after first 100 hours of use.
250 Hours
• Check coupler element (rubber insert) for cracks or wear. Replace as necessary.
• Check the fuel lines every 250 hours. Repair or replace as needed.
• Check valve clearance, intake and exhaust 0.004 to 0.006” every 250 hours.
500 Hours
• Change blower oil every 500 hours.
• Change the high pressure pump oil every 500 hours.
•
Change fuel filter every 500 hours.
• Check coupler element (rubber insert) for cracks or wear. Replace as necessary.
1,000 Hours
• Check plug wires. Replace as necessary every 1,000 hours.
• Check carburetor every 1,000 hours. Clean or replace as necessary.
• Replace coupler element (rubber insert).
• Clean heat exchanger core every 1,000 hours.
Summary of Contents for Truckmount to Go TMTG 4000
