Machine Maintenance: 5-6
Engine Oil Recommendation
While multi-viscosity oils are generally recommended, SAE 5W-30 synthetic is specifically
recommended year round for your TMTG 4000 engine.
Oil Filter
Briggs and Stratton engines use Briggs and Stratton oil filters. An equivalent or better oil
filter must be used when servicing the engine.
To replace the filter, use a proper filter wrench to remove the filter.
Clean the filter mounting base and lightly coat the gasket surface of the new filter with
engine oil. Hand tighten the filter until the gasket contacts the base, then tighten another
½ turn. Fill the engine with the correct amount of oil, run the engine and check for oil leaks
at the drain plug and oil filter gasket.
Spark Plugs
Always use the recommended spark plugs for your engine. Hotter or colder plugs, or similar
plugs that are not exact equivalents to the recommended plugs, can cause permanent
engine damage, reduce the engines useful life, and cause many other problems such as
hard starting, spark knock and run-on. Installing new spark plugs regularly is one of the
best ways to keep your engine at peak performance.
Fuel Filter
There are two fuel filters used on the Truck Mount To Go. One is located between the fuel
tank and fuel pump, behind the soap jug. The second is located on the right of the engine
next to the rocker cover near the carburetor.
Summary of Contents for Truckmount to Go TMTG 4000
