Hydro-Force Brush Pro 17, Operator'S Manual

TECHNICAL DETAILS

Motor

. . . . . . . . . . . . . . . . . .½ hp/800W

Power Cord

. . . . . . . . . . .4” 6awg with ground

Cord Length

. . . . . . . . . . .50’ 4awg extension cord

Brush Speed

  . . . . . . . . . .480 rpm

Weight

. . . . . . . . . . . . . . . . .42.33lb.

Height

  . . . . . . . . . . . . . . . . .8.5”

Overall Depth

  . . . . . . . .9.5”

Cleaning Width

. . . . . . .5”

For servicing and repairs please contact our service technicians at the ad-
dress or numbers below or consult your nearest distributor or dealer.

CAUTIONS /SAFETY ADVICE

•  Always disconnect power cord from the wall outlet before changing 

brushes, maintenance tasks, lift ing the machine off  the fl oor or servicing.

•  Keep away from water.
•  Inspect the power cord prior to each use for abrasions or cuts—if cuts are 

found, replace the cord before use and handling.

•  Th is machines has counter rotating brushes:
•  Do not run the machine over electrical, telephone or computer cables.
•  Do not leave the machine plugged in the power outlet when unattended.
•  Keep children away.
•  Keep out of reach of children.
•  Ensure the handle is in its upright position and the lock is working cor-

rectly prior to connecting the machine to the power supply.

•  Do not run the Brush Pro 17 machine over loose carpet fi bers or edges of 

rugs or carpet matting.

• 

Always store the machine in the storage tray/trolley to 

protect the brushes.

It is the user’s responsibility to operate this machine / 
appliance safely and carefully. Hydro-Force Manufac-
turing does not assume any liability.

HYDRO-FORCE

Brush Pro

Carpet Cleaning Machine and Pile Lift er

HYDRO-FORCE MANUFACTURING

542 West Confl uence Ave.  |  Salt Lake City, Utah 84123

801-268-2673  |  1-800637-3789  |  801-268-3856 fax

PARTS

Part#  Description

 

Snapring A2

2 

Ballbearing 6002-RS

3 

DistancepieceG

5 

Ventilator

6 

Motor RBF 8/2-7PR

7 

Distancepiece E

8 

Trolley cpl.

3 

Microswitch

4 

Switchpart

9 

Ballbearing 6003-2RS

20 

Flange

2 

Housing unit E cpl.

22 

Retaining ring A 7

23 

Protective plate

24 

Motorstud

25 

Brush cover

26 

Brush axle

27 

Handle connector lower part G

29 

Handle connector lower part E

30 

Screw M6x6

3 

Gear 48 right

32 

Gear 48 left 

33 

Gear cover

34 

Lock washer M 5

35 

Gear 66 right

36 

Housing unit G cpl.

39 

Th ermorelay

40 

Gear 66 left 

4 

Gear 73 right

42 

Ballbearing 6000