Wide Bottom:
prevents the sprayer from tipping over
Translucent Bottle:
make it easy to see the level of chemical
2 1/2 Gallon Bottle:
the sprayer holds more chemical, allowing less
frequent refilling.
Removable Bottle:
allows for quick chemical switching
Large cap:
enables easy refills and less chance of spills
15 Feet of Coiled Hose:
Prespray upholstery with sprayer in one
position
Built In Extension Holder:
Keep out of the way on truck
Large Wheels:
Easy movement on commercial jobs or large rooms
Extendable Handle:
for easy transportation and movement
Extra Jets Easily Attached:
move from carpet prespray to upholstery
prespray to protector with different jets
Easy Priming and Rinsing of Lines:
removable jets
Easy to Fix:
remove 6 screws to service pump or battery
Sealed Cavity:
pump protected from spills
Flojet Water Pump:
durable, easy to maintain, self-priming
Rotomolded Plastic:
proven to last for years
Features and Benefits
Hose
Length: 15’
Diameter: 3/8” OD / 1/4” ID
Power Cord detachable
Length: 8 feet
Gauge: 16
Fuse
Amps: 10
Specifications
Pump
Flow: 1 gallon/minute
Pressure: 50 psi
Voltage: 115/102 volt AC
Amperage: 0.6 amp
Jets
Pre-spray:
Veejet, Hydro-Force
part # B281, size = 8005
Protectant:
Teejet, Hydro-Force
part # B006, size = 6501
Troubleshooting
Pump not turning
on - No power
Not spraying
properly
Solution dripping
from jet with
valve closed
Problem Cause
Solution
No power from outlet
Fuse blown
Cord faulty
Faulty switches or internal wiring
Pump motor faulty
Pump seized
Reset breaker or move cord to
another outlet
Check fuse - replace as needed
Replace cord
Check wiring & test switches - repair
as needed
Replace pump motor
Repair or replace pump head &
bearing - Check motor
Jet clogged
Jet worn
Chemical hose not submerged
in jug
Chemcial filter clogged (intake)
Air leak in chemical hose (intake)
Chemical hose restricted (intake)
Chemical jug not vented
Spray hose restricted (outlet)
Spray valve faulty
Debris in pump head
Pump faulty
Faulty switches or internal wiring
Chemcial to thick to pump
properly
Clean or replace jet
Replace jet
Make sure end of chemical hose
with filter is in the chemical
Clean or replace filter
Repair or replace hose
Un-kink, clean out or replace hose
Remove cap - enlarge hole in cap
for hose
Un-kink, clean out or replace hose
Repair or replace valve
Clean out pump head - Replace
valves as needed
Repair or replace pump
Check wiring & test switches
Charge chemicals - Must be similar
in viscosity to water
Spray valve faulty
Check valve faulty
Jet worn
Extension faulty
Repair or replace valve
Replace check valve
Replace jet
Replace extension
3
14
